Factores que influyen en el coeficiente de estabilidaddiámetro y longitud

  1. Cervantes Haro, María Noelia
  2. Encabo Durán, M. J.
  3. Calderín Pérez, Saray
  4. Aragoneses Lamas, Juan Manuel
Aldizkaria:
Avances en periodoncia e implantología oral

ISSN: 1699-6585

Argitalpen urtea: 2014

Alea: 26

Zenbakia: 1

Orrialdeak: 39-44

Mota: Artikulua

DOI: 10.4321/S1699-65852014000100005 DIALNET GOOGLE SCHOLAR lock_openSarbide irekia editor

Beste argitalpen batzuk: Avances en periodoncia e implantología oral

Laburpena

Objectives: To determine if the diameter and length of the dental implants are determinants of primary stability. Materials and methods: 17 unitary OIN Osseolife® Implant System implants were placed with diameters of 3.75, 4.25 and 5.0 mm and lengths of 10 and 11.5 mm. The stability coefficient was measured using the Mentor® Osstell placement during surgery. The results were compared in terms of diameter and length with the statistic for independent samples t test. Results: The stability coefficient was highest for small diameter implants (3.75 mm) and short ones (10 mm) with a ISQ of 75.5 and 76.00 respectively. For other diameters and length results were: implants of 4.25 mm and 5.0 mm obtained a ISQ of 74.7, and 74.33 respectively and for the implant called long (11.5 mm length) stability coefficient was 70.85. In both parameters under study, there were no statistically significant differences with p>0.05. Conclusions: Both the length and the diameter are not determinants of primary stability coefficient.